Fujitsu PRIMERGY TX1310 M3

Upgrade and Maintenance Manual TX1310 M3
Contents
4.5.2 Sliding the HDD cage into the chassis . . . . . . . . . . . . . . 52
4.5.3 Installing the side cover . . . . . . . . . . . . . . . . . . . . . . 55
4.6 Connecting the power cord . . . . . . . . . . . . . . . . . . . 56
4.7 Switching on the server . . . . . . . . . . . . . . . . . . . . . 57
4.8 Handling air deflector . . . . . . . . . . . . . . . . . . . . . . 58
4.8.1 Removing the air deflector . . . . . . . . . . . . . . . . . . . . 58
4.8.2 Installing the air deflector . . . . . . . . . . . . . . . . . . . . . 59
5 Basic software procedures . . . . . . . . . . . . . . . . . . . 61
5.1 Starting the maintenance task . . . . . . . . . . . . . . . . . 61
5.1.1 Suspending BitLocker functionality . . . . . . . . . . . . . . . . 61
5.1.2 Removing backup and optical disk media . . . . . . . . . . . . 63
5.1.3 Verifying and configuring the backup software solution . . . . . . 63
5.2 Completing the maintenance task . . . . . . . . . . . . . . . 64
5.2.1 Updating or recovering the system board BIOS . . . . . . . . . 64
5.2.1.1 Updating or recovering the system board BIOS . . . . . . . . 64
5.2.2 Enabling Option ROM scan . . . . . . . . . . . . . . . . . . . . 65
5.2.3 Reconfiguring the backup software solution . . . . . . . . . . . 66
5.2.4 Enabling replaced components in the BIOS . . . . . . . . . . . 66
5.2.5 Verifying the system time settings . . . . . . . . . . . . . . . . 67
5.2.6 Viewing the System Event Log (SEL) . . . . . . . . . . . . . . . 68
5.2.6.1 Viewing the SEL . . . . . . . . . . . . . . . . . . . . . . . . 68
5.2.7 Updating the NIC configuration file in a Linux and VMware
environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
5.2.8 Resuming BitLocker functionality . . . . . . . . . . . . . . . . . 70
5.2.9 Performing a RAID array rebuild . . . . . . . . . . . . . . . . . 71
5.2.10 Looking up changed MAC / WWN addresses . . . . . . . . . . 72
5.2.10.1 Looking up MAC addresses . . . . . . . . . . . . . . . . . . 72
5.2.11 Using the Chassis ID Prom Tool . . . . . . . . . . . . . . . . . 72
5.2.12 Configuring LAN teaming . . . . . . . . . . . . . . . . . . . . . 73
5.2.12.1 After replacing/upgrading LAN controllers . . . . . . . . . . 73
5.2.12.2 After replacing a system board . . . . . . . . . . . . . . . . 73
6 Power supply unit (PSU) . . . . . . . . . . . . . . . . . . . . 75
6.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . . 75
6.2 Replacing the PSU . . . . . . . . . . . . . . . . . . . . . . . . 76