GE Brivo OEC 715 - Page 352

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
6-18
Exception
ID
Error
Warning
Exception
Description
(In system Log)
Message
(Displayed in User Interface)
Diagnosis Reference
0205513
Warning
Set Xkey lock
failed
Image processing LEDs on
keyboard display exception.
The display may be abnormal.
Please ensure no key is
pressed on keyboard, then
press “Auto B/C” key and
“Negate” key. If this issue
persists, please call for service.
Check system IO state, and
keyboard connection
0205514
Error
Create thread
failed
Execution thread exception.
Please restart the system. If
this issue persists, please call
for service.
System unknown error
0205515
Error
Start thread
failed
Execution thread exception.
Please restart the system. If
this issue persists, please call
for service.
System unknown error
0205517
Error
Register CORBA
servant failed
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
Make sure if omniNames
service failed, any module
initialization failed
0205518
Error
Register CORBA
sync notify
servant failed
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
make sure if omniNames
service failed,
CorbaEventChannel
initialization failed
0205519
Warning
Unregister
CORBA servant
failed
Workstation communication
closing exception. Please
restart the system. If this issue
persists, please call for service.
make sure if omniNames
service failed, check
omniOrb log file
0205520
Error
Subscribe sync
event failed
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
make sure if omniNames
service failed,
CorbaEventChannel
initialization failed
0205521
Error
Unsubscribe
sync event
failed
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
make sure if omniNames
service failed,
CorbaEventChannel
initialization failed
0205522
Error
Resolve CORBA
object in name
service failed
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
make sure if omniNames
service failed, any module
crashed
0205523
Error
Invoke CORBA
interface failed
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
make sure if omniNames
service failed, any module
crashed