GE Brivo OEC 715 - Page 396

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
6-62
Exception
ID
Error
Warning
Exception
Description
(In system Log)
Message
(Displayed in User Interface)
Diagnosis Reference
0401500
Error
Allocate
Memory failed
System run out of memory.
Please restart the system. If
this issue persists, please call
for service.
Re install software
0401501
Warning
Write PIPE
failed
Communication exception.
Please restart the system. If
this issue persists, please call
for service.
Re install software
0401502
Warning
Read PIPE failed
Communication exception.
Please restart the system. If
this issue persists, please call
for service.
Re install software
0401503
Error
Set PIPE failed
Communication ini exception.
Please restart the system. If
this issue persists, please call
for service.
Re install software
0401504
Error
CORBA
communication
failed
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
Re install software
0401505
Error
Sync operation
failed
Execution exception. Please
restart the system. If this issue
persists, please call for service.
Re install software
0401506
Error
Thread
operation failed
Execution thread exception.
Please restart the system. If
this issue persists, please call
for service.
Re install software
0401001
Error
Open serial port
failed
Workstation and mainframe
communication exception.
Please restart the system. If
this issue persists, please call
for service.
0401002
Warning
Write serial port
failed
Workstation and mainframe
communication exception.
Please restart the system. If
this issue persists, please call
for service.