GE MDS ORBIT ECR - Page 252

252 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
Click Next to continue. The next screen requires one to specify the IKE peer endpoint, local IKE identity
and peer IKE identity.
 Local Endpoint – any (default), address, FQDN. This is an optional setting and hence not available
for configuration via the VPN wizard. This can be configured from Services->VPN service->Basic
Config menu.
- Any – Local address is chosen automatically during negotiation.
- Address – Force local address for this connection to a specified IP address.
- FQDN – Force local address for this connection to an IP address resolved by the specified
fully qualified domain name (FQDN).
 Local Identity – Default, address, FQDN, user-FQDN, DN.
- Default – Defaults to local IP address when using pre-shared key based authentication and to
the DN of the local certificate when using certificated-based authentication.
- Address – Use the specified IP address as the local IKE identity.
- FQDN – Use the specified fully qualified domain name (FQDN) as the local IKE identity
- User-FQDN – Use user-fully qualified domain name (user-FQDN) as the local IKE identity.
- DN – Use the specified distinguished name as the local IKE identity.
 Peer Endpoint – Address, FQDN. Required setting.
- Address – Specify the IP address of the IKE peer.