406 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
then the oldest configuration is removed before creating a new one. The most recently
committed configuration (the running configuration) is number 0, the next most recent 1, etc.
Example:
admin@(none)% rollback 1
[ok][2012-06-19 16:28:55]
run
- Run an operational-mode command.
set
- Set a parameter.
show
- Show a parameter.
status
- Display users currently editing the configuration.
tag <add|clear|del>
tag add <statement> <tag> - Add a tag to a configuration statement.
tag del <statement> <tag> - Remove a tag from a configuration statement.
tag clear <statement> - Remove all tags from a configuration statement.
top
- Exit to top level and optionally run command.
up
- Exit one level of configuration.
validate
- Validates current configuration. This is the same operation as commit check.
To Next Page
Loading...
