GE MDS ORBIT ECR - Page 54

54 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
Table 3-3. CLI Quick Reference Table
If you wish to...
Enter this CLI command:
Monitor WiFi Status
> show interfaces-state interface Wi-Fi wifi-status | repeat 5
View the routing table
> show routing
View the event log
> show table logging event-log
Set the admin user’s
password
> request system authentication change-password user admin
password admin1234
Set the device name
% set system name “Mydevice”
Set the baud rate on COM1
% set services serial ports COM1 baud-rate b19200
Download a firmware
package from TFTP server at
192.168.1.10
> request system firmware reprogram-inactive-image filename
mcr-bkrc-4_0_0.mpk manual-file-server { tftp { address
192.168.1.10 } }
Monitor firmware
reprogramming status
> show system firmware reprogram-status
Export configuration file to a
TFTP server at 192.168.1.10
> request system configuration-files export filename
myConfig.xml manual-file-server { tftp { address 192.168.1.10 } }
Reboot device to firmware
inactive image
> request system power restart inactive