GE MDS ORBIT ECR - 3.5.2.1 Cell Status (Including the Module’s IMSI;IMEI)

MDS 05-6632A01, Rev. F MDS Orbit MCR/ECR Technical Manual 73
 Out Errors - For packet-oriented interfaces, the number of outbound packets that could not be
transmitted because of errors.
3.5.2.1 Cell Status (Including the Module’s IMSI/IMEI)
When provisioning the cell module for network service, the cellular provider typically requires the
International Mobile Subscriber Identity code (IMSI) or International Mobile Station Equipment Identity
code (IMEI) to be provided. The Cell Status page contains this information.
Navigate to Interfaces / Cell ---> Status / Cellular
Figure 3-28. Cell Operational Status Screen
 Imsi - International mobile subscriber identity
 Imei - International mobile equipment identity
 Iccid - Unique serial number of the SIM card
 Mdn - Mobile directory number.
 Apn - Access Point Name
 App Sw Version - Application software version.
 Modem Sw Version - Modem software version
 Sim State - SIM state - (Inserted, Not Inserted)
 Modem State - Device state of the cellular modem
 Roaming State - Roaming state of the cellular modem
 Service State - Service state of the cellular modem
 Modem Type - This parameter identifies the type of modem inside the unit.
 Rssi - Received signal strength indicator (dBm) of cellular modem.
Monitoring via the CLI
Ensure the CLI is in Operational mode.