H3C S3100 Series User Manual

1-8
To do… Use the command… Remarks
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client function is
disabled.
Create an HWPing test
group and enter its view
hwping
administrator-name
operation-tag
Required
By default, no test group is configured.
Configure the test type
test-type ftp
Required
By default, the test type is ICMP.
Configure the destination
IP address
destination-ip
ip-address
Required
By default, no destination address is
configured.
Configure the source IP
address
source-ip
ip-address
Required
By default, no source IP address is
configured.
Configure the source port
source-port
port-number
Optional
By default, no source port is configured.
Configure the number of
probes per test
count
times
Optional
By default, each test makes one probe.
Configure a test
description
description
string
Optional
By default, no description information is
configured.
Configure the maximum
number of history records
that can be saved
history-records
number
Optional
By default, the maximum number is 50.
Enable history record
history-record enable
Optional
By default, history record is not enabled.
Configure the retaining
time of history record
history keep-time
keep-time
Optional
By default, the retaining time of history
record is 120 minutes.
Configure statistics
interval and the maximum
number of retained
statistics information
statistics
{
interval
interval |
max-group
number }
Optional
By default, statistics interval is 120 minutes
and up to two pieces of statistics information
can be retained.
Configure the retaining
time of statistics
information
statistics keep-time
keep-time
Optional
By default, the retaining time of statistics
information is 120 minutes.
Configure test start time
and lifetime
test-time begin
{ hh:mm :ss
[ yyyy/mm/dd ] |
now
}
lifetime
lifetime
Optional
By default, no test start time and lifetime is
configured.
Enable routing table
bypass
sendpacket passroute
Optional
By default, routing table bypass is disabled.
Configure the TTL
ttl
number
Optional
By default, TTL is 20.
The sendpacket passroute command voids
the ttl command.
Configure the automatic
test interval
frequency
interval
Optional
By default, the automatic test interval is zero
seconds, indicating no automatic test will be
made.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English