Hexagon RDS - Page 191

Appendix
H000002007-RDS User Manual │Version 5.0.0 (2018-09-17) │190
If toolbar is not reachable, in the menu, select “Tools > Plug-Ins > ROMER > Absolute
Arm Scanning Peripherals”
Don’t forget to save the configuration to keep it as default configuration for new projects.
Configuration for Perceptron scanner
In ImAlign or ImInspect, in the menu, select “Plug-Ins > Perceptron > Contour Probe”: Scanworks starts,
then scanning, and all Scanworks tools are available directly from PolyWorks.