Hexagon RDS - Standard Information; H.1.1 Standard Information

Arm status
H000002007-RDS User Manual │Version 5.0.0 (2018-09-17) │115
H.1.1 STANDARD INFORMATION
Connection status
Arm type
Type of system (NCA), connection (USB / Wi-Fi), and arm (RA7 /
RA7SE / RA7SI)
Serial number
Unit identification number of the arm (only once it is identified by the
HEXAGON Server) (see manual of the arm for the description)
Connected
Shows if the arm is connected ( ) or not ( )
Connected since
Date and time of the establishment of the current connection.
Seen last time on
Date and time of the end of connection of the Off-line arm.
Arm Status
Overall status
Information about connection and status (ex: Rest position)
Armspecs date
time
Date and time of last arm Alignment
Profile name
Arm profile in use.
External
Temperature
Temperature measured by the arm (see arm manual for sensor
location)
Battery Level
On power supply / on Battery + % of the full charge
Position
XYZ Coordinates of the probe centre point
Wrist buttons
state
Show if the button is pressed ( ) or released ( ) for BP0, BP1 and
BP2.
Remote mouse
Shows if the arm mouse is active ( ) or not ( ).
Video capture
Shows if the wrist camera is on ( ) or not ( ).
Head light
Shows if the wrist head light is on ( ) or not ( ).