Hexagon RDS - Connection Setup

RDS Control Panel
H000002007-RDS User Manual │Version 5.0.0 (2018-09-17) │41
D.2 CONNECTION
This tab is used to select the type of arm and type of connection.
4 types of machine and 3 types of connections are available:
Connection module
USB
WLAN
Ad-Hoc Access point
Wired Ethernet
Absolute Arm
(RA8)
CP0
✓
CP1
✓
CP2
✓
✓
CP3
✓
✓
✓
ROMER
Absolute Arm
(RA7/CA7)
None
✓
FP1
✓
FP2
✓
✓
FP2+
✓
✓
FP3
✓
✓
FP3+
✓
✓
✓
Multi Gage
✓
WLAN Activation code
✓
✓
Leica Tracker
(AT960)
✓
According to the selected type of connection, additional parameters may be displayed above.
- Please refer to the arm manual (ROMER Absolute arm manual / Multi Gage manual) for
complete description of WLAN connection.
- WLAN selection for Multi Gage needs a valid WLAN (Wi-Fi) feature.
- SSID, Channel, IP address and WEP can be modified. Refer to RDS Toolbox (§ K.2)