Hexagon RDS - Page 93

Tracker tools
H000002007-RDS User Manual │Version 5.0.0 (2018-09-17) │92
E. TRACKER TOOLS
Once a tracker is connected, RDS displays automatically configuration tools.
This window provides the options to control the reflector and measurement settings.
The Tracker window appears only when a software is connected to RDS, including RDS
Control Panel or RDS Data Collector.
1
Status
Tracker status
2
Selected target
Shows the active reflector, T-Probe or Scanner, and provides the list of
reflectors to manually select them.
/
Start
measurement
According to the settings,
• Triggers the measurement of a point
• Starts / Stops the measurement (continuous time or distance)
Stable probing
Activate / deactivate the auto-triggered point measurement: (after a
movement), once the reflector stabilized, the point is automatically taken.
Show OVC
Displays the video of the overview camera to guide the tracker to find the
target.
Settings
Opens the settings page.
The stable probing doesn’t prevent from manual points with the button .
1
2
3