Hioki 3174 - Page 165

9.4 Message Reference
159
99
Enables/disables and Queries the test time for withstand-voltage tests
Syntax
(Command)
:WITHstand:TIMer <ON/ OFF>
Enables and disables the test time for withstand-voltage tests, in the
READY state.
(Query)
:WITHstand:TIMer?
Queries the test time enablement for withstand-voltage tests.
(Response)
<ON/ OFF>
Example
(Command)
:WITHstand:TIMer ON
Enables the test time for a withstand-voltage tests.
(Query)
:WITHstand:TIMer?
(Response)
ON
The test time for the withstand-voltage tests is set to ON.
Error
The execution of this command in a state other than the READY state or "test set-
ting state" causes an execution error.