Honeywell Experion C300 User Manual

CEEC300 Function Block
Main Tab
R301.1 Experion C300 Controller User's Guide 107
11/06 Honeywell
CEEC300 via parameters. The following table summarizes the parameter data you can
monitor and/or configure on the Main tab of the configuration form for the selected
CEEC300 block.
Plain Text Parameter Name
User
Configurable
Notes
Main
Tag Name
Tag Name
Project Only
System assigned or
user configured unique
name. Consisting of up
to 16 characters and at
least one character
must be a letter (A-Z).
Item Name
Item Name
Project Only
A non-unique name by
which an entity is
known within the
context of the enterprise
model.
Base Execution
Period
BASEPERIOD
Yes
Indicates the base
execution period for the
CEE block.
Command/State
Control Execution
Environment(CEE)
Command
CEECOMMAND
Yes
Indicates the command
to change the
CEESTATE parameter.
Control Execution
Environment(CEE)
State
CEESTATE
No
The current state of
CEE.
User Lock for CEE
Run
USERLCKTORUN
Yes
Indicates the user level
required to perform a
coldstart and warmstart.
User Lock for CEE
Idle
USERLCKTOIDLE
Yes
Indicates the user level
required to command
CEEIDLE.
Program Access may
command CEE from
Idle to Run
PROGLCKTORUN
Yes
Determines whether
program access is
allowed to command
CEE from Idle to Run.

Honeywell Experion C300 Specifications

General

Brand	Honeywell
Model	Experion C300
Category	Controller
Language	English