Assign I/O Modules to C300 IOLINK blocks
To assign Series C IO Modules and Process Manager IOMs to IOLINK blocks
R301.1 Experion C300 Controller User's Guide 71
11/06 Honeywell
Step Action Result
3
Accept default IOLINK selection or click
desired IOLINK in list.
Be sure correct IOLINK is selected in list.
4
Click the
assign button.
Selected IOM is assigned to the selected
IOLINK and appears in the Assigned
Modules list.
Note: You may need to select the
IOLINK in the list to view the IOM just
assigned to it.
To Next Page
Loading...
