94
Field Description
sync distance
Synchronization distance relative to the upper-level clock, in
seconds, and calculated from dispersion and roundtrip delay
values.
Precision Accuracy of the system clock.
version NTP version in the range of 1 to 4.
source interface
Source interface.
If the source interface is not specified, this field displays
Not
specified
.
Reftime Reference timestamp in the NTP message.
Orgtime Originate timestamp in the NTP message.
Rcvtime Receive timestamp in the NTP message.
Xmttime Transmit timestamp in the NTP message.
Filter order Dispersion information.
Reference clock status
Status of the local clock. The field is displayed only when you use
the
ntp-service refclock-master
command to set the local clock
as a reference clock.
When the reach field of the local clock is 255, the field is displayed
as
working normally
. Otherwise, the field is displayed as
working abnormally
.
Total sessions Total number of associations.
display ntp-service sessions
Use display ntp-service sessions to display information about all IPv4 NTP associations.
Syntax
display ntp-service sessions [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed information about all IPv4 NTP associations. If you do not specify this
keyword, the command displays only brief information about the NTP associations.
Usage guidelines
When a device is operating in NTP broadcast or multicast server mode, the display ntp-service
sessions command does not display the IPv4 NTP association information corresponding to the
broadcast or multicast server. However, the associations are counted in the total number of
associations.
Examples
# Display brief information about all IPv4 NTP associations.
<Sysname> display ntp-service sessions
To Next Page
Loading...
Need help?
General