86
Predefined user roles
network-admin
network-operator
Examples
# Display NQA server status.
<Sysname> display nqa server
NQA server status: Enabled
TCP connect:
IP address Port Tos VPN instance
2.2.2.2 2000 200 -
UDP echo:
IP address Port Tos VPN instance
3.3.3.3 3000 255 -
Table 14 Command output
Field Description
NQA server status Whether the NQA server is enabled.
TCP connect Information about the TCP listening service on the NQA server.
UDP echo Information about the UDP listening service on the NQA server.
IP address IP address specified for the TCP/UDP listening service on the NQA server.
Port Port number specified for the TCP/UDP listening service on the NQA server.
Tos ToS value in reply packets sent by the NQA server.
VPN instance
Name of the VPN instance to which the IP address that the NQA server
listens on belongs. This field displays a hyphen (-) if the NQA server listens
on a public IP address.
This field is not supported in the current software version.
Related commands
nqa server enable
nqa server tcp-connect
nqa server udp-echo
nqa server enable
Use nqa server enable to enable the NQA server.
Use undo nqa server enable to disable the NQA server.
Syntax
nqa server enable
undo nqa server enable
Default
The NQA server is disabled.
To Next Page
Loading...
Need help?
General