53
Use undo out interface to restore the default.
Syntax
out interface interface-type interface-number
undo out interface
Default
The output interface for probe packets is not specified. The NQA client determines the output
interface based on the routing table lookup.
Views
ICMP echo operation view
DHCP operation view
UDP tracert operation view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
For successful operation, the specified output interface must be up.
If both the next-hop and out interface commands are configured for the ICMP echo operation, the
out interface command does not take effect.
Examples
# Specify VLAN-interface 1 as the output interface for probe packets in the UDP tracert operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-tracert
[Sysname-nqa-admin-test-udp-tracert] out interface vlan-interface 1
password
Use password to specify a password.
Use undo password to restore the default.
Syntax
password { cipher | simple } string
undo password
Default
No password is specified.
Views
FTP/HTTP operation view
FTP/HTTP/HTTPS template view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General