137
GE1/0/29 0.0 0.0 30.0
GE1/0/30 0.0 0.0 30.0
GE1/0/31 0.0 0.0 30.0
GE1/0/32 0.0 0.0 30.0
GE1/0/33 0.0 0.0 30.0
GE1/0/34 0.0 0.0 30.0
GE1/0/35 0.0 0.0 30.0
GE1/0/36 0.0 0.0 30.0
GE1/0/37 0.0 0.0 30.0
GE1/0/38 0.0 0.0 30.0
GE1/0/39 0.0 0.0 30.0
GE1/0/40 0.0 0.0 30.0
GE1/0/41 0.0 0.0 30.0
GE1/0/42 0.0 0.0 30.0
GE1/0/43 0.0 0.0 30.0
GE1/0/44 0.0 0.0 30.0
GE1/0/45 0.0 0.0 30.0
GE1/0/46 0.0 0.0 30.0
GE1/0/47 0.0 0.0 30.0
GE1/0/48 0.0 0.0 30.0
--- On State Ports: 0; Used: 0.0(W); Remaining: 180.0(W) ---
Table 26 Command output
Field Description
Interface Interface name of a PI.
CurPower Current power of a PI.
PeakPower Peak power of a PI.
MaxPower Maximum power of a PI.
PD Description Type and location description for the PD connected to a PI.
Ports On Number of PIs that are supplying power.
Used Power consumed by all PIs.
Remaining Total remaining power of the system.
display poe pse
Use display poe pse to display detailed PSE information.
Syntax
display poe pse [ pse-id ]
Views
Any view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General