HPE FlexNetwork 5130 HI SERIES

307
Port mirroring commands
display mirroring-group
Use display mirroring-group to display mirroring group information.
Syntax
display mirroring-group { group-id | all | local | remote-destination | remote-source }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-id: Specifies a mirroring group by its number. The value range is 1 to 4.
all: Specifies all mirroring groups.
local: Specifies local mirroring groups.
remote-destination: Specifies remote destination groups.
remote-source: Specifies remote source groups.
Usage guidelines
Mirroring group information includes the type, status, and content of a mirroring group. It is sorted by
mirroring group number.
Examples
# Display information about all mirroring groups.
<Sysname> display mirroring-group all
Mirroring group 1:
Type: Local
Status: Active
Mirroring port:
GigabitEthernet1/0/1 Inbound
Monitor port: GigabitEthernet1/0/2
Table 76 Command output
Field Description
Mirroring group Number of the mirroring group.
Type
Type of the mirroring group:
• Local.
• Remote source.
• Remote destination.
Status
Status of the mirroring group:
• Active—The mirroring group has taken effect.
• Incomplete—The mirroring group configuration is not complete and
does not take effect.