40
<Sysname> system-view
[Sysname] nqa template http httptplt
[Sysname-nqatplt-http-httptplt] expect status 200 300 400 to 500
filename
Use filename to specify a file to be transferred between the FTP server and the FTP client.
Use undo filename to restore the default.
Syntax
filename filename
undo filename
Default
No file is specified.
Views
FTP operation view
FTP template view
Predefined user roles
network-admin
Parameters
filename: Specifies the name of a file, a case-sensitive string of 1 to 200 characters that cannot
contain slashes (/).
Examples
# Specify config.txt as the file to be transferred between the FTP server and the FTP client for the
FTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] filename config.txt
# In FTP template view, specify config.txt as the file to be transferred between the FTP server and
the FTP client.
<Sysname> system-view
[Sysname] nqa template ftp ftptplt
[Sysname-nqatplt-ftp-ftptplt] filename config.txt
frequency
Use frequency to specify the interval at which the NQA operation repeats.
Use undo frequency to restore the default.
Syntax
frequency interval
undo frequency
To Next Page
Loading...
Need help?
General