HPE FlexNetwork 5130 HI SERIES User Manual

283
Table 68 Command output
Field Description
CPU utilization in 5 secs: 16.8%;
1 min: 4.7%; 5 mins: 4.7%
System CPU usage within the last 5 seconds, 1 minute, and 5 minutes.
JID Job ID of a process. It never changes.
5Sec CPU usage of the process within the last 5 seconds.
1Min CPU usage of the process within the last minute.
5Min CPU usage of the process within the last 5 minutes.
Name
Name of the process. If square brackets ([ ]) exist in a process name, the
process is a kernel thread.
display process log
Use display process log to display log information for all user processes.
Syntax
display process log [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for the master device.
cpu cpu-number: Specifies a CPU by its number.
Examples
# Display log information for all user processes.
<Sysname> display process log
Process JobID PID Abort Core Exit Kill StartTime EndTime
knotify 92 92 N N 0 36 12-17 07:10:27 12-17 07:10:27
knotify 93 93 N N 0 -- 12-17 07:10:27 12-17 07:10:27
automount 94 94 N N 0 -- 12-17 07:10:27 12-17 07:10:28
knotify 111 111 N N 0 -- 12-17 07:10:28 12-17 07:10:28
comsh 121 121 N N 0 -- 12-17 07:10:30 12-17 07:10:30
knotify 152 152 N N 0 -- 12-17 07:10:31 12-17 07:10:31
autocfgd 155 155 N N 0 -- 12-17 07:10:31 12-17 07:10:31
pkg_update 122 122 N N 0 -- 12-17 07:10:30 12-17 07:10:31
Table 69 Command output
Field Description
Process Name of a user process.
JobID Job ID of a user process.

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English