To Next Page

To Previous Page

164

display snmp-agent sys-info

Use display snmp-agent sys-info to display SNMP agent system information.

Syntax

display snmp-agent sys-info [ contact | location | version ] *

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

contact: Displays the system contact.

location: Displays the physical location of the device.

version: Displays the SNMP agent version.

Usage guidelines

If you do not specify any keywords, this command displays all SNMP agent system information.

Examples

# Display all SNMP agent system information.

[Sysname]display snmp-agent sys-info

The contact information of the agent:

Hewlett Packard Enterprise Company

3000 Hanover St

Palo Alto, CA 94304

The location information of the agent:

The SNMP version of the agent:

SNMPv3

Related commands

snmp-agent sys-info

display snmp-agent trap queue

Use display snmp-agent trap queue to display basic information about the trap queue.