337
Default
The log file feature is enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable log output to the log file.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Use info-center logfile frequency to configure the interval at which the system saves logs from the
log file buffer to the log file.
Use undo info-center logfile frequency to restore the default.
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
Default
The log file saving interval is 86400 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
freq-sec: Specifies the log file saving interval in seconds. The value range is 1 to 86400.
Usage guidelines
This command enables the system to automatically save logs in the log file buffer to the log file at the
specified interval.
Examples
# Set the log file saving interval to 60000 seconds.
<Sysname> system-view
[Sysname] info-center logfile frequency 60000
Related commands
info-center logfile enable
info-center logfile overwrite-protection
Use info-center logfile overwrite-protection to enable log file overwrite-protection.
Use undo info-center logfile overwrite-protection to disable log file overwrite-protection.
To Next Page
Loading...
Need help?
General