HPE FlexNetwork 5130 HI SERIES

17
destination port
Use destination port to configure the destination port number for the operation.
Use undo destination port to restore the default.
Syntax
destination port port-number
undo destination port
Default
The destination port number is 33434 for the UDP tracert operation.
The destination port numbers for the operations that use the following NQA templates are:
• 53 for the DNS template.
• 21 for the FTP template.
• 80 for the HTTP template.
• 443 for the HTTPS template.
No destination port number is configured for other types of operations.
Views
TCP/UDP echo operation view
UDP tracert operation view
UDP jitter/voice operation view
DNS/SSL/TCP/UDP template view
Predefined user roles
network-admin
Parameters
port-number: Specifies the destination port number for the operation, in the range of 1 to 65535.
Examples
# Set the destination port number to 9000 for the UDP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] destination port 9000
# In TCP template view, set the destination port number to 9000 for the NQA operation.
<Sysname> system-view
[Sysname] nqa template tcp tcptplt
[Sysname-nqatplt-tcp-tcptplt] destination port 9000
display nqa history
Use display nqa history to display the history records of NQA operations.
Syntax
display nqa history [ admin-name operation-tag ]