HPE FlexNetwork 5130 HI SERIES User Manual

189
Syntax
snmp-agent trap queue-size size
undo snmp-agent trap queue-size
Default
The SNMP notification queue can store a maximum of 100 notifications.
Views
System view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum number of notifications that the SNMP notification queue can hold. The
value range is 1 to 1000.
Usage guidelines
When congestion occurs, the SNMP agent buffers notifications in a queue. SNMP notification queue
size sets the maximum number of notifications that this queue can hold. When the queue size is
reached, the oldest notifications are dropped for new notifications.
Examples
# Set the SNMP notification queue size to 200.
<Sysname> system-view
[Sysname] snmp-agent trap queue-size 200
Related commands
snmp-agent target-host
snmp-agent trap enable
snmp-agent trap life
snmp-agent usm-user { v1 | v2c }
Use snmp-agent usm-user { v1 | v2c } to create an SNMPv1 or SNMPv2c user.
Use undo snmp-agent usm-user { v1 | v2c } to delete an SNMPv1 or SNMPv2c user.
Syntax
snmp-agent usm-user { v1 | v2c } user-name group-name [ acl { ipv4-acl-number | name
ipv4-acl-name } | acl ipv6 { ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent usm-user { v1 | v2c } user-name
Default
No SNMPv1 or SNMPv2c users exist.
Views
System view
Predefined user roles
network-admin
Parameters
v1: Specifies SNMPv1.

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English