HPE FlexNetwork 5130 HI SERIES User Manual

54
Parameters
cipher: Specifies a password in encrypted form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string: Specifies the password. The plaintext form of the password is a case-sensitive string of 1 to
32 characters. The encrypted form of the password is a case-sensitive string of 1 to 73 characters.
Examples
# Set the FTP login password to ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password simple ftpuser
# Set the FTP login password to ftpuser in FTP template view.
<Sysname> system-view
[Sysname] nqa template ftp ftptplt
[Sysname-nqatplt-ftp-ftptplt] password simple ftpuser
Related commands
operation
username
probe count
Use probe count to specify the probe times.
Use undo probe count to restore the default.
Syntax
probe count times
undo probe count
Default
In an UDP tracert operation, the NQA client sends three probe packets to each hop along the path.
In other types of operations, the NQA client performs one probe to the destination per operation.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
UDP tracert operation view
ICMP jitter/UDP jitter operation view
Predefined user roles
network-admin
Parameters
times: Specifies the probe times.
• For the UDP tracert operation, this argument specifies the times of probes to each hop along
the path. The value range for this argument is 1 to 10.

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English