317
Flow mirroring commands
mirror-to cpu
Use mirror-to cpu to configure a mirroring action that mirrors traffic to the CPU.
Use undo mirror-to cpu to delete the mirroring action that mirrors traffic to the CPU.
Syntax
mirror-to cpu
undo mirror-to cpu
Default
No mirroring action exists to mirror traffic to the CPU.
Views
Traffic behavior view
Predefined user roles
network-admin
Examples
# Create traffic behavior 1 and configure the action of mirroring traffic to the CPU for the traffic
behavior.
<Sysname> system-view
[Sysname] traffic behavior 1
[Sysname-behavior-1] mirror-to cpu
mirror-to interface
Use mirror-to interface to configure a mirroring action that mirrors traffic to an interface.
Use undo mirror-to interface to delete a mirroring action that mirrors traffic to an interface.
Syntax
mirror-to interface interface-type interface-number [ destination-ip destination-ip-address
source-ip source-ip-address [ dscp dscp-value | vlan vlan-id | vrf-instance vrf-name ] * ]
undo mirror-to interface interface-type interface-number
Default
No mirroring actions exist to mirror traffic to interfaces.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
destination-ip destination-ip-address: Specifies the destination IP address for the mirrored packets.
source-ip source-ip-address: Specifies the source IP address for the mirrored packets.
To Next Page
Loading...
Need help?
General