319
sFlow commands
display sflow
Use display sflow to display sFlow configuration and operation information.
Syntax
display sflow
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display sFlow configuration and operation information.
<Sysname> display sflow
sFlow datagram version: 5
Global information:
Agent IP: 10.10.10.1(CLI)
Source address: 10.0.0.1 2001::1
Collector information:
ID IP Port Aging Size VPN-instance Description
1 22:2:20::10 6535 N/A 1400 netserver
2 192.168.3.5 6543 500 1400 Office
Port information:
Interface CID Interval(s) FID MaxHLen Rate Mode Status
GE1/0/1 1 100 1 128 1000 Random Active
GE1/0/2 2 100 2 128 1000 Random Active
Table 78 Command output
Field Description
sFlow datagram version
sFlow version, which can only take the value of 5. The device can send only
sFlow packets whose sFlow version is 5.
Global information Global sFlow information.
Agent IP
IP address of the sFlow agent:
• CLI—Manually configured IP address.
• Auto—Automatically configured IP address.
Source address Source IP address of sFlow packets.
Collector information sFlow collector information.
ID sFlow collector ID.
IP sFlow collector IP address.
Port sFlow collector port.
To Next Page
Loading...
Need help?
General