HPE FlexNetwork 5130 HI SERIES

165
Examples
# Display the trap queue configuration and usage status.
<Sysname> display snmp-agent trap queue
Queue size: 100
Message number: 6
Related commands
snmp-agent trap life
snmp-agent trap queue-size
display snmp-agent trap-list
Use display snmp-agent trap-list to display SNMP notifications enabling status for modules.
Syntax
display snmp-agent trap-list
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
If a module has multiple sub-modules and SNMP notifications are enabled for one of its sub-modules,
the command output shows that the module is SNMP notifications-enabled.
To determine whether a module supports SNMP notifications, execute the snmp-agent trap enable ?
command.
The display snmp-agent trap-list command output varies by the snmp-agent trap enable
command configuration and the module configuration.
Examples
# Display SNMP notifications enabling status for modules.
<Sysname> display snmp-agent trap-list
arp notification is disabled.
configuration notification is enabled.
mac-address notification is enabled.
radius notification is disabled.
standard notification is enabled.
syslog notification is disabled.
system notification is enabled.
Enabled notifications: 4; Disabled notifications: 3
Related commands
snmp-agent trap enable
display snmp-agent usm-user
Use display snmp-agent usm-user to display SNMPv3 user information.