HPE FlexNetwork 5130 HI SERIES

HPE FlexNetwork 5130 HI Switch Series
Network Management and Monitoring
Command Reference
Part number: 5200-3617
Software version: Release 13xx
Document version: 6W100-20170315

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English

Summary

Ping, tracert, and system debugging commands

debugging

ping

Test network reachability and latency to a destination IP address.

tracert

Trace the path that packets traverse from source to destination.

NQA commands

advantage-factor

destination ip

display nqa result

Display the most recent result of an NQA operation.

reaction checked-element rtt

nqa server enable

NTP commands

ntp-service authentication enable

Enable NTP authentication for secure time synchronization.

PoE commands

apply poe-profile interface

Apply a PoE profile to PIs for power delivery configuration.

display poe interface

Display power supplying information for PIs.

poe enable

Enable or disable PoE on a PI.

SNMP commands

display snmp-agent community

snmp-agent target-host

Configure an SNMP notification target host for NMS.

RMON commands

display rmon alarm

display rmon statistics

Display RMON statistics for interface traffic.

CWMP commands

cwmp enable

Enable or disable CWMP for device management.

cwmp acs default url

cwmp cpe username

EAA commands

action cli

Add a CLI action to a monitor policy for automation.

display rtm policy

event cli

Process monitoring and maintenance commands

display process

display process cpu

Display CPU usage for all processes.

monitor kernel deadloop enable

Enable kernel thread deadloop detection.

Port mirroring commands

mirroring-group

mirroring-group monitor-port (interface view)

Information center commands

diagnostic-logfile save

info-center logfile enable

Packet capture commands

packet-capture interface

Capture incoming packets on an interface.

packet-capture read