298
4 4 115 S 0 0K 00:00:06 0.00% [ksoftirqd/0]
5 5 99 S 0 0K 00:00:00 0.00% [watchdog/0]
7 7 115 S 0 0K 00:00:00 0.00% [khelper]
4796 4796 120 S 11 2744K 00:00:00 0.00% login
4797 4797 120 S 8 28832K 00:00:03 0.00% comsh
<Sysname>
# Display process statistics in interactive mode.
<Sysname> monitor process
76 processes; 103 threads; 687 fds
Thread states: 1 running, 102 sleeping, 0 stopped, 0 zombie
CPU states: 78.98% idle, 0.16% user, 14.57% kernel, 6.27% interrupt
Memory: 496M total, 341M available, page size 4K
JID PID PRI State FDs MEM HH:MM:SS CPU Name
1047 1047 120 R 9 1420K 00:02:39 14.13% diagd
1 1 120 S 17 1092K 00:00:23 3.98% scmd
1027 1027 120 S 12 9280K 00:01:13 1.44% devd
1000 1000 115 S 0 0K 00:00:09 0.36% [sock/1]
1009 1009 115 S 0 0K 00:00:09 0.36% [karp/1]
4 4 115 S 0 0K 00:00:06 0.18% [ksoftirqd/0]
1010 1010 115 S 0 0K 00:00:13 0.18% [kND/1]
4795 4795 120 S 11 2372K 00:00:01 0.18% telnetd
5491 5491 120 S 8 1500K 00:00:00 0.18% top
2 2 115 S 0 0K 00:00:00 0.00% [kthreadd]
The system refreshes process statistics every 5 seconds. You can enter interactive commands to
perform operation as follows:
• Enter h or a question mark (?) to display help information as follows:
Help for interactive commands:
?,h Show the available interactive commands
1 Toggle SMP view: '1' single/separate states
c Sort by the CPU field(default)
d Set the delay interval between screen updates
f Sort by number of open files
k Kill a job
l Refresh the screen
m Sort by memory used
n Set the maximum number of processes to display
q Quit the interactive display
t Sort by run time of processes since last restart
< Move sort field to the next left column
> Move sort field to the next right column
Press any key to continue
• Enter d, and then enter a number to modify the refresh interval. If you enter 3, statistics are
refreshed every 3 seconds.
Enter the delay interval between updates(1~2147483647): 3
• Enter n, and then enter a number to modify the maximum number of displayed processes. If
you enter 5, statistics for five processes are displayed.
Enter the max number of processes to display(0 means unlimited): 5
To Next Page
Loading...
Need help?
General