HPE FlexNetwork 5130 HI SERIES User Manual

327
Examples
# Display the diagnostic log file configuration.
<Sysname> display diagnostic-logfile summary
Diagnostic log file: Enabled.
Diagnostic log file size quota: 10 MB
Diagnostic log file directory: flash:/diagfile
Writing frequency: 24 hour 0 min 0 sec
Table 79 Command output
Field Description
Diagnostic log file
Status of the diagnostic log file:
• Enabled—Diagnostic logs can be output to the diagnostic
log file.
• Disabled—Diagnostic logs cannot be output to the
diagnostic log file.
Diagnostic log file size quota Maximum size for the diagnostic log file, in MB.
Log file directory Directory where the diagnostic log file is saved.
Writing frequency
Interval at which the system saves diagnostic logs from the
buffer to the diagnostic log file.
display info-center
Use display info-center to display information center configuration.
Syntax
display info-center
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information center configuration.
<Sysname> display info-center
Information Center: Enabled
Console: Enabled
Monitor: Enabled
Log host: Enabled
192.168.0.1,
port number: 5000, host facility: local7
Log buffer: Enabled
Max buffer size 1024, current buffer size 512,
Current messages 0, dropped messages 0, overwritten messages 0
Log file: Enabled
Security log file: Enabled
Information timestamp format:

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English