HPE FlexNetwork 5130 HI SERIES User Manual

143
--- On State Ports: 0; Used: 0.0(W); Remaining: 180.0(W) ---
Table 29 Command output
Field Description
Interface Interface name of a PI.
Current Current power of a PI.
Peak Peak power of a PI.
Max Maximum power of a PI.
PD Description Type and location description for the PD connected with a PI.
Ports On Number of PIs that are supplying power.
Used Power consumed by all PIs.
Remaining Remaining power on the PSE.
display poe-profile
Use display poe-profile to display information about the PoE profile.
Syntax
display poe-profile [ index index | name profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
index index: Specifies a PoE profile by its index number in the range of 1 to 100.
name profile-name: Specifies a PoE profile by its name, a case-sensitive string of 1 to 15 characters.
Usage guidelines
If you do not specify a profile, the command displays information about all PoE profiles.
Examples
# Display information about all PoE profiles.
<Sysname> display poe-profile
PoE Profile Index ApplyNum Interfaces Configuration
forIPphone 1 4 GE1/0/1 poe enable
GE1/0/2 poe priority critical
GE1/0/3
GE1/0/4
forAP 2 2 GE1/0/5 poe enable
GE1/0/6 poe max-power 14000
--- Total PoE profiles: 2, total ports: 6 ---
# Display information about the PoE profile with index number 1.
<Sysname> display poe-profile index 1

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English