107
ntp-service dscp
Use ntp-service dscp to set a DSCP value for IPv4 NTP packets.
Use undo ntp-service dscp to restore the default.
Syntax
ntp-service dscp dscp-value
undo ntp-service dscp
Default
The DSCP value for IPv4 NTP packets is 48.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Sets a DSCP value in the range of 0 to 63 for IPv4 NTP packets.
Usage guidelines
The DSCP value is included in the ToS field of an IPv4 packet to identify the packet priority.
Examples
# Set the DSCP value for IPv4 NTP packets to 30.
<Sysname> system-view
[Sysname] ntp-service dscp 30
ntp-service enable
Use ntp-service enable to enable the NTP service.
Use undo ntp-service enable to disable the NTP service.
Syntax
ntp-service enable
undo ntp-service enable
Default
The NTP service is disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the NTP service.
<Sysname> system-view
[Sysname] ntp-service enable
To Next Page
Loading...
Need help?
General