HPE FlexNetwork 5130 HI SERIES User Manual

167
Storage-type: nonVolatile
UserStatus: active
Table 41 Command output
Field Description
Username SNMP username.
Group name SNMP group name.
Role name SNMP user role name.
Engine ID Engine ID that the SNMP agent used when the SNMP user was created.
Storage-type
Storage type:
• volatile.
• nonvolatile.
• permanent.
• readOnly.
• other.
For more information about these storage types, see Table 31.
UserStatus
SNMP user status:
• active—The SNMP user is effective.
• notInService—The SNMP user is correctly configured but not activated.
• notReady—The SNMP user configuration is incomplete.
• other—Any other status.
ACL
Number of the ACL.
This field appears only when an ACL is specified for the SNMPv3 user. It is
exclusive with the
ACL name
field.
ACL name
Name of the ACL.
This field appears only when an ACL is specified for the SNMPv3 user. It is
exclusive with the
ACL
field.
Related commands
snmp-agent usm-user v3
enable snmp trap updown
Use enable snmp trap updown to enable link state notifications on an interface.
Use undo enable snmp trap updown to disable link state notifications on an interface.
Syntax
enable snmp trap updown
undo enable snmp trap updown
Default
Link state notifications are enabled.
Views
Interface view
Predefined user roles
network-admin

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English