320
Field Description
Aging
Remaining lifetime of the sFlow collector. If this field displays
N/A
, the sFlow
collector never ages out.
Size Maximum length of the sFlow data portion in an sFlow packet.
VPN-instance
Name of the VPN instance to which the sFlow collector belongs.
This field is not supported in the current software version.
Description Description of the sFlow collector.
Port information Information about interfaces configured with sFlow.
Interface Interface configured with sFlow.
CID
ID of the sFlow collector for receiving counter sampled packets. If no sFlow
collector ID is specified, this field displays
0
.
Interval(s) Counter sampling interval, in seconds.
FID
ID of the sFlow collector for receiving flow sampled packets. If no sFlow
collector ID is specified, this field displays
0
.
MaxHLen
Maximum number of bytes that can be copied in a sampled packet (starting
from the packet header).
Rate
Number of packets out of which the interface samples a packet by using flow
sampling.
Mode Flow sampling mode.
Status
sFlow status of the port:
• Suspended—The sFlow feature is suspended because the port is down.
• Active—The sFlow feature is active because the port is up.
sflow agent
Use sflow agent to configure an IP address for the sFlow agent.
Use undo sflow agent to restore the default.
Syntax
sflow agent { ip ipv4-address | ipv6 ipv6-address }
undo sflow agent { ip | ipv6 }
Default
No IP address is configured for the sFlow agent. The device periodically identifies whether the sFlow
agent has an IP address. If the sFlow agent does not have an IP address, the device automatically
selects an IPv4 address for the sFlow agent. It does not save the IPv4 address in the configuration
file.
Views
System view
Predefined user roles
network-admin
Parameters
ip ipv4-address: Specifies an IPv4 address for the sFlow agent.
ipv6 ipv6-address: Specifies an IPv6 address for the sFlow agent.
To Next Page
Loading...
Need help?
General