HPE FlexNetwork 5130 HI SERIES

147
undo poe max-power
Default
The maximum PI power is 30000.
Views
PI view
PoE profile view
Predefined user roles
network-admin
Parameters
max-power: Sets the maximum PI power in milliwatts. The value range is 1000 to 30000.
Examples
# Set the maximum PI power to 12000 milliwatts in PI view.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] poe max-power 12000
# Set the maximum PI power to 12000 milliwatts in PoE profile view.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe max-power 12000
Related commands
poe pd-description
Use poe pd-description to configure a description for the PD that connects to a PI.
Use undo poe pd-description to restore the default.
Syntax
poe pd-description text
undo poe pd-description
Default
No description is configured for the PD that connects to a PI.
Views
PI view
Predefined user roles
network-admin
Parameters
text: Configures a description for the PD connected to the PI, a case-sensitive string of 1 to 80
characters.
Examples
# Configure the description for the PD as IP Phone for Room 101.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1