HPE FlexNetwork 5130 HI SERIES User Manual

14
Usage guidelines
In ICMP echo and path jitter operations, the command sets the payload size for each ICMP echo
request.
In UDP echo, UDP jitter, UDP tracert, and voice operations, the command sets the payload size for
each UDP packet.
Examples
# Set the payload size to 80 bytes for each ICMP echo request.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] data-size 80
# In ICMP template view, set the payload size to 80 bytes for each probe packet.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] data-size 80
description
Use description to configure a description for an NQA operation, such as the operation type or
purpose.
Use undo description to restore the default.
Syntax
description text
undo description
Default
No description is configured for an NQA operation.
Views
Any NQA operation view
Any NQA template view
Predefined user roles
network-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 200 characters.
Examples
# Configure the description as icmp-probe for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe
# In ICMP template view, configure the description as icmp-probe for the NQA operation.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] description icmp-probe

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English