300
• T—Traced or stopped.
• D—Uninterruptible sleep.
• Z—Zombie.
FDs Number of open files for a process.
MEM Memory usage. It displays
0
for a kernel thread.
HH:MM:SS Running time of a process since last restart.
CPU CPU usage of a process.
Name
Name of a process. If square brackets ([ ]) exist in a process name, the process
is a kernel thread.
monitor thread
Use monitor thread to display thread statistics.
Syntax
monitor thread [ dumbtty ] [ iteration number ] [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
dumbtty: Specifies dumbtty mode. In this mode, the command displays all thread statistics in
descending order of CPU usage without refreshing statistics. If you do not specify the keyword, the
command displays statistics for top 10 processes in descending order of CPU usage in an interactive
mode, and refreshes statistics every 5 seconds by default.
iteration number: Specifies the number of display times, in the range of 1 to 4294967295. If you
specify the dumbtty keyword, the number argument is 1 by default. If neither the dumbtty keyword
nor the number argument is specified, there is no limit to the display times.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for the master device.
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
If you do not specify the dumbtty keyword, the command displays thread statistics in an interactive
mode. In this mode, the system automatically determines the number of displayed thread processes
according to the screen size and does not display exceeding processes. You can also input
interactive commands as shown in Table 74 to perform relevant op
eration
s.
Table 74 Interactive commands
Commands Description
? or h Displays help information that includes available interactive commands.
d Sets the interval for refreshing statistics. The default interval is 5 seconds.
k
Kills a process. Because the command can impact system operation, be cautious when
you use it.
l Refreshes the screen.
n
Changes the maximum number of threads displayed within a screen, in the range of 0
To Next Page
Loading...
Need help?
General