HPE FlexNetwork 5130 HI SERIES User Manual

162
An SNMP engine ID uniquely identifies an SNMP entity in an SNMP domain.
If you do not specify a remote SNMP entity, this command displays the engine IDs of all remote
SNMP entities.
Examples
# Display engine IDs of all remote SNMP entities.
<Sysname> display snmp-agent remote
Remote engineID: 800063A28000A0FC00580400000001
IPv4 address: 1.1.1.1
Table 39 Command output
Field Description
Remote
engineID
Remote SNMP engine ID you have configured using the
snmp-agent remote
command.
IPv4 address IPv4 address of the remote SNMP entity.
IPv6 address
IPv6 address of the remote SNMP entity. This field is displayed if the remote SNMP
entity is configured with an IPv6 address.
Related commands
snmp-agent remote
display snmp-agent statistics
Use display snmp-agent statistics to display SNMP message statistics.
Syntax
display snmp-agent statistics
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display SNMP message statistics.
<Sysname> display snmp-agent statistics
1684 messages delivered to the SNMP entity.
5 messages were for an unsupported version.
0 messages used an unknown SNMP community name.
0 messages represented an illegal operation for the community supplied.
0 ASN.1 or BER errors in the process of decoding.
1679 messages passed from the SNMP entity.
0 SNMP PDUs had badValue error-status.
0 SNMP PDUs had genErr error-status.
0 SNMP PDUs had noSuchName error-status.
0 SNMP PDUs had tooBig error-status (Maximum packet size 1500).
16544 MIB objects retrieved successfully.
2 MIB objects altered successfully.

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English