42
Predefined user roles
network-admin
Usage guidelines
To display the history records of the NQA operation, use the display nqa history command.
The undo form of the command also removes existing history records of an NQA operation.
Examples
# Enable the saving of history records for the NQA operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-record enable
Related commands
display nqa history
history-record keep-time
Use history-record keep-time to set the lifetime of history records for an NQA operation.
Use undo history-record keep-time to restore the default.
Syntax
history-record keep-time keep-time
undo history-record keep-time
Default
The history records of an NQA operation are kept for 120 minutes.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
UDP tracert operation view
Predefined user roles
network-admin
Parameters
keep-time: Specifies how long the history records can be saved. The value range is 1 to 1440
minutes.
Usage guidelines
When an NQA operation completes, the timer starts. All records are removed when the lifetime is
reached.
Examples
# Set the lifetime of the history records to 100 minutes for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-record keep-time 100
To Next Page
Loading...
Need help?
General