217
Examples
# Set the DSCP value to 30 for outgoing NETCONF over SOAP over HTTP packets.
<Sysname> system-view
[Sysname] netconf soap http dscp 30
netconf soap http enable
Use netconf soap http enable to enable NETCONF over SOAP over HTTP.
Use undo netconf soap http enable to disable NETCONF over SOAP over HTTP.
Syntax
netconf soap http enable
undo netconf soap http enable
Default
NETCONF over SOAP over HTTP is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command is not available in FIPS mode.
This command enables the device to resolve NETCONF messages that are encapsulated with
SOAP in HTTP packets.
Examples
# Enable NETCONF over SOAP over HTTP.
<Sysname> system-view
[Sysname] netconf soap http enable
netconf soap https acl
Use netconf soap https acl to apply an ACL to NETCONF over SOAP over HTTPS traffic.
Use undo netconf soap https acl to restore the default.
Syntax
netconf soap https acl { acl-number | name acl-name }
undo netconf soap https acl
Default
No ACL is applied to NETCONF over SOAP over HTTPS traffic.
Views
System view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General