HPE FlexNetwork 5130 HI SERIES User Manual

187
Examples
# Enable the SNMP agent to send SNMP authentication failure notifications.
<Sysname> system-view
[Sysname] snmp-agent trap enable standard authentication
Related commands
snmp-agent target-host
snmp-agent trap if-mib link extended
Use snmp-agent trap if-mib link extended to configure the SNMP agent to send extended
linkUp/linkDown notifications.
Use undo snmp-agent trap if-mib link extended to restore the default.
Syntax
snmp-agent trap if-mib link extended
undo snmp-agent trap if-mib link extended
Default
The SNMP agent sends standard linkUp/linkDown notifications.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Extended linkUp and linkDown notifications add interface description and interface type to the
standard linkUp/linkDown notifications for fast failure point identification.
When you use this command, make sure the NMS supports the extended linkup and linkDown
notifications.
Examples
# Enable extended linkUp/linkDown notifications.
<Sysname> system-view
[Sysname] snmp-agent trap if-mib link extended
snmp-agent trap life
Use snmp-agent trap life to set the lifetime of notifications in the SNMP notification queue.
Use undo snmp-agent trap life to restore the default notification lifetime.
Syntax
snmp-agent trap life seconds
undo snmp-agent trap life
Default
The SNMP notification lifetime is 120 seconds.
Views
System view

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English