13
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] data-fill abcd
# In TCP template view, specify abcd as the payload fill string for probe packets.
<Sysname> system-view
[Sysname] nqa template tcp tcptplt
[Sysname-nqatplt-tcp-tcptplt] data-fill abcd
data-size
Use data-size to set the payload size for each probe packet.
Use undo data-size to restore the default.
Syntax
data-size size
undo data-size
Default
The default payload size of a probe packet for different operations is described in Table 5.
Table 5 Default payload size of a probe packet
Operation type Codec type Default size (bytes)
ICMP echo N/A 100
UDP echo N/A 100
UDP jitter N/A 100
UDP tracert N/A 100
Path jitter N/A 100
Voice G.711 A-law 172
Voice G.711 µ-law 172
Voice G.729 A-law 32
Views
ICMP/UDP echo operation view
UDP tracert operation view
Path jitter/UDP jitter/voice operation view
ICMP/UDP template view
Predefined user roles
network-admin
Parameters
size: Specifies the payload size. Available value ranges include:
• 20 to 65507 bytes for the ICMP echo, UDP echo, or UDP tracert operation.
• 68 to 65507 bytes for the UDP jitter or path jitter operation.
• 16 to 65507 bytes for the voice operation.
To Next Page
Loading...
