HPE FlexNetwork 5130 HI SERIES

73
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dns
[Sysname-nqa-admin-test-dns] resolve-target domain1
# In DNS template view, specify domain1 as the domain name to be resolved.
<Sysname> system-view
[Sysname] nqa template dns dnstplt
[Sysname-nqatplt-dns-dnstplt] resolve-target domain1
resolve-type
Use resolve-type to configure the domain name resolution type.
Use undo resolve-type to restore the default.
Syntax
resolve-type { A | AAAA }
undo resolve-type
Default
The domain name resolution type is type A.
Views
DNS template view
Predefined user roles
network-admin
Parameters
A: Specifies the type A queries. A type A query resolves a domain name to a mapped IPv4 address.
AAAA: Specifies the type AAAA queries. A type AAAA query resolves a domain name to a mapped
IPv6 address.
Examples
# In DNS template view, set the domain name resolution type to A.
<Sysname> system-view
[Sysname] nqa template dns dnstplt
[Sysname-nqatplt-dns-dnstplt] resolve-type A
route-option bypass-route
Use route-option bypass-route to enable the routing table bypass feature to test the connectivity to
the direct destination.
Use undo route-option bypass-route to disable the routing table bypass feature.
Syntax
route-option bypass-route
undo route-option bypass-route
Default
The routing table bypass feature is disabled.