154
Syntax
display snmp-agent context [ context-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
context-name: Specifies an SNMP context by its name, a case-sensitive string of 1 to 32 characters.
If you do not specify this argument, the command displays all SNMP contexts.
Examples
# Display all SNMP contexts.
<Sysname> display snmp-agent context
testcontext
Related commands
snmp-agent context
display snmp-agent group
Use display snmp-agent group to display information about SNMP groups.
Syntax
display snmp-agent group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies an SNMPv1, SNMPv2c, or SNMPv3 group name in non-FIPS mode, and an
SNMPv3 group name in FIPS mode. It is a case-sensitive string of 1 to 32 characters. If you do not
specify a group, this command displays information about all SNMP groups.
Examples
# Display information about all SNMP groups.
<Sysname> display snmp-agent group
Group name: groupv3
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonvolatile
ACL name: testacl
To Next Page
Loading...
Need help?
General