265
gp:0x0000000120020460 sp:0x000000ffff899d70
s8:0x000000ffff899d80 ra:0x0000000120006c1c
sr:0x000000000400fff3 lo:0xdf3b645a1cac08c9
hi:0x000000000000007f bad:0x000000555589ba84
cause:0x0000000000800020 pc:0x0000005555a3bcb4
Table 61 Command output
Filed Description
Crashed PID ID of the crashed process.
Crash signal
Signals that led to the crash:
• SIGABRT—Abort.
• SIGBUS—Bus error.
• SIGFPE—Erroneous arithmetic operation.
• SIGILL—Illegal hardware instructions.
• SIGQUIT—Quit signal sent by the controlling
terminal.
• SIGSEGV—Invalid memory access.
• SIGSYS—Invalid system call.
• SIGTRAP—Trap message.
• SIGXCPU—CPU usage limit exceeded.
• SIGXFSZ—File size limit exceeded.
• SIGUNKNOW—Unknown reason.
Crash time Time when the crash occurred.
Core file path Directory where the core file is saved.
Backtrace stopped All stack information has been displayed.
Related commands
reset exception context
display exception filepath
Use display exception filepath to display the core file directory.
Syntax
display exception filepath [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
command displays the core file directory on the IRF master device.
cpu cpu-number: Specifies a CPU by its number.
Examples
# Display the core file directory on the specified slot.
<Sysname> display exception filepath slot 1
To Next Page
Loading...
Need help?
General