HPE FlexNetwork 5130 HI SERIES User Manual

146
Views
System view
Predefined user roles
network-admin
Parameters
pse-id: Specifies a PSE by its ID.
Examples
# Enable PoE for PSE 4.
<Sysname> system-view
[Sysname] poe enable pse 4
Related commands
display poe pse
poe legacy enable
Use poe legacy enable to enable the PSE to detect nonstandard PDs.
Use undo poe legacy enable to disable the PSE from detecting nonstandard PDs.
Syntax
poe legacy enable pse pse-id
undo poe legacy enable pse pse-id
Default
Nonstandard PD detection is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
pse pse-id: Specifies a PSE by its ID.
Examples
# Enable PSE 4 to detect nonstandard PDs.
<Sysname> system-view
[Sysname] poe legacy enable pse 4
Related commands
display poe pse
poe max-power
Use poe max-power to set the maximum PI power.
Use undo poe max-power to restore the default.
Syntax
poe max-power max-power

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English