HPE FlexNetwork 5130 HI SERIES User Manual

180
Examples
# Include the mib-2 (OID 1.3.6.1.2.1) subtree in the mibtest view and exclude the system subtree
from this view.
<Sysname> system-view
[Sysname] snmp-agent sys-info version v1
[Sysname] snmp-agent mib-view included mibtest 1.3.6.1.2.1
[Sysname] snmp-agent mib-view excluded mibtest system
[Sysname] snmp-agent community read public mib-view mibtest
An SNMPv1 NMS in the public community can query the objects in the mib-2 subtree but not any
object (for example, the sysDescr or sysObjectID node) in the system subtree.
Related commands
display snmp-agent mib-view
snmp-agent group
snmp-agent packet max-size
Use snmp-agent packet max-size to set the maximum size (in bytes) of SNMP packets that the
SNMP agent can receive or send.
Use undo snmp-agent packet max-size to restore the default.
Syntax
snmp-agent packet max-size byte-count
undo snmp-agent packet max-size
Default
An SNMP agent can process SNMP packets with a maximum size of 1500 bytes.
Views
System view
Predefined user roles
network-admin
Parameters
byte-count: Sets the maximum size (in bytes) of SNMP packets that the SNMP agent can receive or
send. The value range is 484 to 17940.
Usage guidelines
If any device on the path to the NMS does not support packet fragmentation, limit the SNMP packet
size to prevent large-sized packets from being discarded. For most networks, the default value is
sufficient.
Examples
# Set the maximum SNMP packet size to 1024 bytes.
<Sysname> system-view
[Sysname] snmp-agent packet max-size 1024
snmp-agent port
Use snmp-agent port to specify the UDP port for receiving SNMP packets.
Use undo snmp-agent port to restore the default.

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English